PhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucket
Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts

Wednesday, February 12, 2014

Simple Valentine Treats...

 


My daughter spotted some sporty dog tag Valentine's a few weeks back. The only problem was that they did not come with envelopes and they were quite small.

My solution was a trip to the grocery and dollar store and to use craft supplies I already had on hand.

I love when I can create a cute DIY treat with hardly any effort at all! Yes, there is some measuring of paper and the cutting of paper, but it really isn't difficult.

If you like to craft, I guarantee you will most likely have many of the supplies needed to make this Valentine Treat!

Even if you don't, you will not need to break the bank to create it...


Simple Valentine Treats

  • Small Zip Seal Treat Bags, (Approx. 3.75 by 5.75 inches)
  • Valentine Candy
  • Card Stock
  • Stapler and Staples
  • Hole Punch (Optional)
  • Washi Tape or Ribbon (Optional)
  • Valentine Stickers
  • Valentine's of Your Choice
Fill the treat bags with the Valentine Candy, and close the zip seal. Using a paper cutter, cut card stock in squares that can be folded in half and that will fit the top width of the treat bags. 

Fold the cut card stock in half and sandwich the top of the zip seal treat bags in between the folded card stock. Use a stapler to staple the card stock on. If you'd like, staple with colored staples.

Now, depending on the type of Valentine's you have, punch a hole into the card stock, then the Valentine if needed, and tie the Valentine onto the treat bag with ribbon.

You can also use Washi tape to adhere the Valentine to the card stock. 

Finally add Valentine stickers to complete the treat bags.

Have fun!

Monday, May 6, 2013

DIY Chalkboard Flower Pot for Teacher Appreciation...

 


Teacher Appreciation Week is upon us and I always enjoy creating something for my kids to give as a "Thank You" to their teachers.

It's always nice to show our teachers how grateful we are for them. After all, they are with our children most of the time during the school year. Without their dedication we wouldn't have doctor's, lawyers, performers, artists, or entrepreneurs....... and there are many more jobs/careers besides the ones listed, of course.

Teacher Appreciation Week runs through May 10th, so there's still time to whip up a little something! This flower pot is super simple and of low cost. I spent less than $10.00 for this gift!

I hope you'll try your hand at this economical and simple DIY gift...

Supplies:

  • Terracotta Pot, Small or Medium Size
  • Painters Tape
  • Chalkboard Spray Paint
  • Potting Soil
  • Flower, Any kind
  • String or Washi Tape
  • Two Pieces of Chalk, White or Colored
Begin by removing any price stickers from the terracotta pot and tape off the rim with painters tape. Shake the chalkboard spray paint according to the directions before use. In a well ventilated area, on either a large piece of cardboard or a tarp, spray the untaped area of the pot, using short sweeping strokes. 

Allow the paint to dry, about 15-20 minutes, then apply a second coat. If you don't have the entire area of the pot covered, wait another 15-20 minutes, then apply a third coat. This will depend on how big your pot is. It should only take two coats for the chalkboard paint to be ready to write on. 

Plant your flower using some potting soil. After wiping any soil that has dirtied the finished pot, have your child write a message with a separate piece of chalk. Attach an unused piece of chalk with either string or washi tape.

Thursday, April 18, 2013

DIY Photo Board for Food Photography...

 


A few months ago, I decided to make my own photo board to use for all of my food photography. Honestly, it was sooo much easier than I thought it would be!

I wanted a simple DIY project that did not include me building anything. This photo board was completed in only a few simple steps......

...... SCORE!

Mama loves an easy project! I still need to get in gear and finish three other boards. I'm planning on making a white board, a teal blue board, and an espresso stained board.

Let's start off with what you will need!

Supplies:

  • One, 2ft. x 4ft. piece of plywood, cut in half to make two, 2ft. x 2ft. square boards. 
Home Depot will cut the wood for FREE! I bought two pieces of plywood and had them cut, to total four boards.
  • Sandpaper and/or a sanding block. 
The roughness of the plywood will determine what sandpaper you use. I used 120 (medium) grit and 220 (finishing) grit.

  • Tack cloth.
  •  Non-toxic acrylic paint, one base coat color and one accent color.
I used Delta Creative Ceramcoat Acrylic Paint in Pearl Finish for my base and Martha Stewart Multi-Surface Satin Acrylic Paint in Wet Cement for my accent.
  • Paint brush or a large foam brush.
  • An old (clean) rag or old (clean) t-shirt.
  • Safety glasses and a sanding respirator. 
You certainly don't want any of the sanding particles getting in your eyes or lungs!

Instructions:

1.) Sand the best side of the board and the sides of the board down, starting with the lowest grit of sandpaper. Sand until smooth and there aren't any more splinters. Finish sanding with the higher grit of sandpaper.

2.) Wipe the surface of the sanded board with a tack cloth, or other clean cloth, to get any fine sanding particles off before painting.

3.) Using a paint brush, paint the board using the base coat, in long strokes. Painting with the grain of the board. If applying a second coat, allow the paint to dry completely.

4.) Either on the first coat or second coat (depending on how many coats you apply) of the base coat, when it is still a bit tacky, apply the accent color using the rag or t-shirt. Squeeze small amounts of the accent color in different areas of the board and wipe along the grain of the board. Apply the accent color in as many areas as you like.

5.) Allow the board to dry completely before using.

Now how easy is that!?!

I don't have an exact total on the cost... since I can't find my receipts. I already had the paint brush, tack cloth, and respirator, so those were of no cost. With the cost of the other items, I'm pretty sure I spent around $28 for this project. That includes the other half of the unfinished plywood. So with the cost of some other paint, you have potentially two finished boards!

This project is so worth it if you do a ton of food photography! Now, to get to those other boards.....

Related Posts Plugin for WordPress, Blogger...